Embedded Files
Electronics, Embedded, Automation
Simple Solutions for Complex World
Products to Reduce Industrial Instrumentation Complexity
A research, development and design based company for robust industrial devices
Rate & Totaliser Indicator for Flowmeters - FMRT-L-S
Big 0.56 inch LED, 6 Digits Display for better distant visibility, 5 Digit Flow rate and 6 Digit Totaliser
Input: Pulse or 4-20mA (Linear & Square-root user selectable option)
2 Control Inputs for Totaliser start, stop, reset, batch start, batch stop
2 Relay outputs for batching & alarms
User selectable Rate and Totaliser window, retains on power-cycle
High precision Analog 4-20mA output Vs Flow rate, accuracy +/- 0.05% FS
Rate and Totaliser data available on RS485 Modbus RTU output
Password protected user configurable settings through front panel keypad
Panel mount single DIN 48x96mm front bezel, depth behind panel 70mm only
LED Indication for Relays and Communication
Universal Power Supply design, works on 85-265VAC and 8V to 30V DC as well
2 Line Alphanumeric Backlit LCD, 6 Digit Rate & 8 Digit Totaliser.
Input: High Impedance Digital Pulse Inputs, Voltage Pulse, 4/20mA Current Pulse, Open-Collector Pulse, TTL, NAMUR, REED, Sinusoidal milli-Volt
2 Relay outputs for batching & alarms with LED indication
Analog Output: 4-20mA Current Vs Rate, 0-5V & 0-10V Voltage Option also Available.
Digital Ouptut: Un-Scaled Pulse
Flow Data Available On Modbus RTU Protocol RS485 (factory default), RS232 Option Available
Seven Segment LCD, 5 Digit flowrate and 8 Digit Totaliser
Input: Isolated Sinosidal Magnetic Pick up with 20 mVp-p sensitivity
Totaliser Remote Reset function through Normally Open(N.O.)
High precision Analog 4-20mA output (with loop powered 10-28 V)
Rate and Totaliser data available on RS485 Modbus RTU output
Powered by AA size Lithium battery with life expectancy upto 5 years.
User configurable flow units Volume: M3, LIT, GAL, TON, KG, BBL , Rate: /HR, /MIN, /SEC and /DAY
Level & Volume Indicator
Backlit LCD, 6 Digit Level & 8 Digit tank Volume Indication
Supports 12 tank geometries: spherical, cylindrical vertical and horizontal (flat and hemi ends), conical, rectangular, cone frustum, inverted pyramid and frustum, non linear shape and horizontal cylinder with conical end.
01 no. 4-20mA Linear input from Level Transducer.
2 Relay outputs for batching & alarms
High precision Analog 4-20mA output Vs Level/Volume, accuracy upto +/- 0.05% FS
RS485, Modbus RTU Compliant
Password protected user configurable settings through front panel keypad
Panel mount single DIN 45x91mm front bezel, depth behind panel 80mm only
Universal Power Supply design, works on 85-265VAC and 8V to 30V DC as wel
RS485 Modbus RTU to Ethernet Modbus TCP/IP Converter
Ethernet to Serial (Bi-Directional) Converter
16-Channel Digital Inputs to Modbus RTU compliant RS485 Converter
Modbus RTU RS485 to 16-Channel Digital Output Converter
Profibus / Serial RS485 Isolator cum Repeater
Profibus / RS485 Isolator cum Repeater
3 way isolation between power supply, input and output
Upto 30V DC, 10A Operating Power Supply
Applications:
Redundant DC Power Supplies
Safe guards power supplies from reverse current from high capacitive loads during power-failure events
Dual Line Alphanumeric Backlit LCD Display
± 2% Relative Humidity
± 0.5% Temperature
Modbus RTU Compliant RS485 Output
Ventilated, Wall-mount ABS Enclosure
8-Channel Precision Analog to Digital Converter, 12-Bit / 0.05% FS Accuracy
4-20mA, 0-5V, 1-5V, 0-10V & 1-10V DC input options
Measurement data available on high-speed Modbus RTU Compliant RS485 Output
8-Channel Precision Digital to Analog Converter, 12-Bit / 0.05% FS Accuracy
Gernerates analog output as per holding register write operation from Master
4-20mA, 0-5V, 1-5V, 0-10V & 1-10V DC output options available
RS485 to 4-20mA Converter : High Precision 4-20mA Output
Acts as RS485 Modbus RTU Master to fetch process data from any slave device
Float data fetch for high precision 4-20mA output - single channel
Accuracy: +/- 0.05% FS, Factory Calibrated
User Configurable - auto switch to slave mode for easy configuration of register address, device id, baud rate, stop bit & parity, timeout, fail retry count etc.
3-Wire Analog Output
4 CO2 sensor input for panel mount display
Displays live CO2 PPM values and operation on dual line alphanumeric backlit LCD
Integration with BMS for fire alarm
8 digital outputs, 4 for LOW & 4 for HIGH for fan speed control
2 Analog Outputs (4-20mA) for VFDs and PLCs
RS485 Modbus RTU Output as Standard
LED Indication for LOW, HIGH, FIRE and Communication
Questions?
Contact to develop a custom electronics as per your specific requirements
Google Sites
Report abuse